CAPT LOCK ADVANTAGES OF CAPT LOCK - No keyway, No Boring cost - Easy assembly and disasembly Both actions take place by locking and unlocking the clamping screws with common tools. - Wider machining tolerance For the shaft-hub connection wider tolerances on machining are admitted, with consequential economy. - Supeior holding power The action of the clamping cones creates shaft clamping torque superior to a normal keyed hub. - Overload protection When the pre-set torque is exceeded, CAPT LOCK will slip, preventing the connected elements from being broken. Note: CAPT LOCK units are not friction coupling; so, excessive slip will cause damage. - Easy adjustment Combining the CAPT LOCK design of smooth cone action with superior holding power, the hub can be clamped at any position along a shaft, eliminating the need for lock washers, spacers, stop rings, etc. - Unlimited use possibilities CAPT LOCK units are suitable to connect any kind of hub (flywheels, chainwheels, gears, levers, pulleys, eccentrics, coupling, etc.). TAPER BUSH ADVANTAGES OF TAPER BUSH - No reboring and keywaying costs. - Saves time and cost in fitting keys. - Eliminates precision taper fitting keys. - Over 400 bush size/bore combinations are available with both metric and imperial bores. - Interchangeable between many products. - Taper bored components can be transferred to other diameters shafts by fitting alternative bore bushes. - Convenience in dismantling for maintenance and component replacement. - Accommodates shaft limits of +0.051mm (0.002"),0.127mm (0.005"). WELD ON HUB BOLT ON HUB ADAPTOR